Class

Notification (ui/notification)

@ckeditor/ckeditor5-ui/src/notification/notification

class

The Notification plugin.

This plugin sends a few types of notifications: success, info and warning. The notifications need to be handled and displayed by a plugin responsible for showing the UI of the notifications. Using this plugin for dispatching notifications makes it possible to switch the notifications UI.

Note that every unhandled and not stopped warning notification will be displayed as a system alert. See showWarning.

Filtering

Properties

Static properties

  • readonly inherited static

    isContextPlugin : true

  • readonly static

    pluginName : 'Notification'

Methods

  • inherited

    constructor( context )

    Creates a new plugin instance.

    Parameters

    context : Editor | Context
  • inherited

    bind( bindProperties ) → MultiBindChain

    Binds observable properties to other objects implementing the Observable interface.

    Read more in the dedicated guide covering the topic of property bindings with some additional examples.

    Consider two objects: a button and an associated command (both Observable).

    A simple property binding could be as follows:

    button.bind( 'isEnabled' ).to( command, 'isEnabled' );
    

    or even shorter:

    button.bind( 'isEnabled' ).to( command );
    

    which works in the following way:

    • button.isEnabled instantly equals command.isEnabled,
    • whenever command.isEnabled changes, button.isEnabled will immediately reflect its value.

    Note: To release the binding, use unbind.

    You can also "rename" the property in the binding by specifying the new name in the to() chain:

    button.bind( 'isEnabled' ).to( command, 'isWorking' );
    

    It is possible to bind more than one property at a time to shorten the code:

    button.bind( 'isEnabled', 'value' ).to( command );
    

    which corresponds to:

    button.bind( 'isEnabled' ).to( command );
    button.bind( 'value' ).to( command );
    

    The binding can include more than one observable, combining multiple data sources in a custom callback:

    button.bind( 'isEnabled' ).to( command, 'isEnabled', ui, 'isVisible',
    	( isCommandEnabled, isUIVisible ) => isCommandEnabled && isUIVisible );
    

    Using a custom callback allows processing the value before passing it to the target property:

    button.bind( 'isEnabled' ).to( command, 'value', value => value === 'heading1' );
    

    It is also possible to bind to the same property in an array of observables. To bind a button to multiple commands (also Observables) so that each and every one of them must be enabled for the button to become enabled, use the following code:

    button.bind( 'isEnabled' ).toMany( [ commandA, commandB, commandC ], 'isEnabled',
    	( isAEnabled, isBEnabled, isCEnabled ) => isAEnabled && isBEnabled && isCEnabled );
    

    Parameters

    bindProperties : Array<'off' | 'on' | 'once' | 'listenTo' | 'stopListening' | 'fire' | 'delegate' | 'stopDelegating' | 'set' | 'bind' | 'unbind' | 'decorate' | 'destroy' | 'context' | 'init' | 'showSuccess' | 'showInfo' | 'showWarning'>

    Observable properties that will be bound to other observable(s).

    Returns

    MultiBindChain

    The bind chain with the to() and toMany() methods.

  • inherited

    bind( bindProperty1, bindProperty2 ) → DualBindChain<K1, Notification[ K1 ], K2, Notification[ K2 ]>

    Binds observable properties to other objects implementing the Observable interface.

    Read more in the dedicated guide covering the topic of property bindings with some additional examples.

    Consider two objects: a button and an associated command (both Observable).

    A simple property binding could be as follows:

    button.bind( 'isEnabled' ).to( command, 'isEnabled' );
    

    or even shorter:

    button.bind( 'isEnabled' ).to( command );
    

    which works in the following way:

    • button.isEnabled instantly equals command.isEnabled,
    • whenever command.isEnabled changes, button.isEnabled will immediately reflect its value.

    Note: To release the binding, use unbind.

    You can also "rename" the property in the binding by specifying the new name in the to() chain:

    button.bind( 'isEnabled' ).to( command, 'isWorking' );
    

    It is possible to bind more than one property at a time to shorten the code:

    button.bind( 'isEnabled', 'value' ).to( command );
    

    which corresponds to:

    button.bind( 'isEnabled' ).to( command );
    button.bind( 'value' ).to( command );
    

    The binding can include more than one observable, combining multiple data sources in a custom callback:

    button.bind( 'isEnabled' ).to( command, 'isEnabled', ui, 'isVisible',
    	( isCommandEnabled, isUIVisible ) => isCommandEnabled && isUIVisible );
    

    Using a custom callback allows processing the value before passing it to the target property:

    button.bind( 'isEnabled' ).to( command, 'value', value => value === 'heading1' );
    

    It is also possible to bind to the same property in an array of observables. To bind a button to multiple commands (also Observables) so that each and every one of them must be enabled for the button to become enabled, use the following code:

    button.bind( 'isEnabled' ).toMany( [ commandA, commandB, commandC ], 'isEnabled',
    	( isAEnabled, isBEnabled, isCEnabled ) => isAEnabled && isBEnabled && isCEnabled );
    

    Type parameters

    K1
    K2

    Parameters

    bindProperty1 : K1

    Observable property that will be bound to other observable(s).

    bindProperty2 : K2

    Observable property that will be bound to other observable(s).

    Returns

    DualBindChain<K1, Notification[ K1 ], K2, Notification[ K2 ]>

    The bind chain with the to() and toMany() methods.

  • inherited

    bind( bindProperty ) → SingleBindChain<K, Notification[ K ]>

    Binds observable properties to other objects implementing the Observable interface.

    Read more in the dedicated guide covering the topic of property bindings with some additional examples.

    Consider two objects: a button and an associated command (both Observable).

    A simple property binding could be as follows:

    button.bind( 'isEnabled' ).to( command, 'isEnabled' );
    

    or even shorter:

    button.bind( 'isEnabled' ).to( command );
    

    which works in the following way:

    • button.isEnabled instantly equals command.isEnabled,
    • whenever command.isEnabled changes, button.isEnabled will immediately reflect its value.

    Note: To release the binding, use unbind.

    You can also "rename" the property in the binding by specifying the new name in the to() chain:

    button.bind( 'isEnabled' ).to( command, 'isWorking' );
    

    It is possible to bind more than one property at a time to shorten the code:

    button.bind( 'isEnabled', 'value' ).to( command );
    

    which corresponds to:

    button.bind( 'isEnabled' ).to( command );
    button.bind( 'value' ).to( command );
    

    The binding can include more than one observable, combining multiple data sources in a custom callback:

    button.bind( 'isEnabled' ).to( command, 'isEnabled', ui, 'isVisible',
    	( isCommandEnabled, isUIVisible ) => isCommandEnabled && isUIVisible );
    

    Using a custom callback allows processing the value before passing it to the target property:

    button.bind( 'isEnabled' ).to( command, 'value', value => value === 'heading1' );
    

    It is also possible to bind to the same property in an array of observables. To bind a button to multiple commands (also Observables) so that each and every one of them must be enabled for the button to become enabled, use the following code:

    button.bind( 'isEnabled' ).toMany( [ commandA, commandB, commandC ], 'isEnabled',
    	( isAEnabled, isBEnabled, isCEnabled ) => isAEnabled && isBEnabled && isCEnabled );
    

    Type parameters

    K

    Parameters

    bindProperty : K

    Observable property that will be bound to other observable(s).

    Returns

    SingleBindChain<K, Notification[ K ]>

    The bind chain with the to() and toMany() methods.

  • inherited

    decorate( methodName ) → void

    Turns the given methods of this object into event-based ones. This means that the new method will fire an event (named after the method) and the original action will be plugged as a listener to that event.

    Read more in the dedicated guide covering the topic of decorating methods with some additional examples.

    Decorating the method does not change its behavior (it only adds an event), but it allows to modify it later on by listening to the method's event.

    For example, to cancel the method execution the event can be stopped:

    class Foo extends ObservableMixin() {
    	constructor() {
    		super();
    		this.decorate( 'method' );
    	}
    
    	method() {
    		console.log( 'called!' );
    	}
    }
    
    const foo = new Foo();
    foo.on( 'method', ( evt ) => {
    	evt.stop();
    }, { priority: 'high' } );
    
    foo.method(); // Nothing is logged.
    

    Note: The high priority listener has been used to execute this particular callback before the one which calls the original method (which uses the "normal" priority).

    It is also possible to change the returned value:

    foo.on( 'method', ( evt ) => {
    	evt.return = 'Foo!';
    } );
    
    foo.method(); // -> 'Foo'
    

    Finally, it is possible to access and modify the arguments the method is called with:

    method( a, b ) {
    	console.log( `${ a }, ${ b }`  );
    }
    
    // ...
    
    foo.on( 'method', ( evt, args ) => {
    	args[ 0 ] = 3;
    
    	console.log( args[ 1 ] ); // -> 2
    }, { priority: 'high' } );
    
    foo.method( 1, 2 ); // -> '3, 2'
    

    Parameters

    methodName : 'off' | 'on' | 'once' | 'listenTo' | 'stopListening' | 'fire' | 'delegate' | 'stopDelegating' | 'set' | 'bind' | 'unbind' | 'decorate' | 'destroy' | 'context' | 'init' | 'showSuccess' | 'showInfo' | 'showWarning'

    Name of the method to decorate.

    Returns

    void
  • inherited

    delegate( events ) → EmitterMixinDelegateChain

    Delegates selected events to another Emitter. For instance:

    emitterA.delegate( 'eventX' ).to( emitterB );
    emitterA.delegate( 'eventX', 'eventY' ).to( emitterC );
    

    then eventX is delegated (fired by) emitterB and emitterC along with data:

    emitterA.fire( 'eventX', data );
    

    and eventY is delegated (fired by) emitterC along with data:

    emitterA.fire( 'eventY', data );
    

    Parameters

    events : Array<string>

    Event names that will be delegated to another emitter.

    Returns

    EmitterMixinDelegateChain
  • inherited

    destroy() → void

    Destroys the plugin.

    Note: This method is optional. A plugin instance does not need to have it defined.

    Returns

    void
  • inherited

    fire( eventOrInfo, args ) → GetEventInfo<TEvent>[ 'return' ]

    Fires an event, executing all callbacks registered for it.

    The first parameter passed to callbacks is an EventInfo object, followed by the optional args provided in the fire() method call.

    Type parameters

    TEvent : extends BaseEvent

    The type describing the event. See BaseEvent.

    Parameters

    eventOrInfo : GetNameOrEventInfo<TEvent>

    The name of the event or EventInfo object if event is delegated.

    args : TEvent[ 'args' ]

    Additional arguments to be passed to the callbacks.

    Returns

    GetEventInfo<TEvent>[ 'return' ]

    By default the method returns undefined. However, the return value can be changed by listeners through modification of the evt.return's property (the event info is the first param of every callback).

  • init() → void

    Returns

    void
  • inherited

    listenTo( emitter, event, callback, [ options ] ) → void

    Registers a callback function to be executed when an event is fired in a specific (emitter) object.

    Events can be grouped in namespaces using :. When namespaced event is fired, it additionally fires all callbacks for that namespace.

    // myEmitter.on( ... ) is a shorthand for myEmitter.listenTo( myEmitter, ... ).
    myEmitter.on( 'myGroup', genericCallback );
    myEmitter.on( 'myGroup:myEvent', specificCallback );
    
    // genericCallback is fired.
    myEmitter.fire( 'myGroup' );
    // both genericCallback and specificCallback are fired.
    myEmitter.fire( 'myGroup:myEvent' );
    // genericCallback is fired even though there are no callbacks for "foo".
    myEmitter.fire( 'myGroup:foo' );
    

    An event callback can stop the event and set the return value of the fire method.

    Type parameters

    TEvent : extends BaseEvent

    The type describing the event. See BaseEvent.

    Parameters

    emitter : Emitter

    The object that fires the event.

    event : TEvent[ 'name' ]

    The name of the event.

    callback : GetCallback<TEvent>

    The function to be called on event.

    [ options ] : GetCallbackOptions<TEvent>

    Additional options.

    Returns

    void
  • inherited

    off( event, callback ) → void

    Stops executing the callback on the given event. Shorthand for this.stopListening( this, event, callback ).

    Parameters

    event : string

    The name of the event.

    callback : Function

    The function to stop being called.

    Returns

    void
  • inherited

    on( event, callback, [ options ] ) → void

    Registers a callback function to be executed when an event is fired.

    Shorthand for this.listenTo( this, event, callback, options ) (it makes the emitter listen on itself).

    Type parameters

    TEvent : extends BaseEvent

    The type descibing the event. See BaseEvent.

    Parameters

    event : TEvent[ 'name' ]

    The name of the event.

    callback : GetCallback<TEvent>

    The function to be called on event.

    [ options ] : GetCallbackOptions<TEvent>

    Additional options.

    Returns

    void
  • inherited

    once( event, callback, [ options ] ) → void

    Registers a callback function to be executed on the next time the event is fired only. This is similar to calling on followed by off in the callback.

    Type parameters

    TEvent : extends BaseEvent

    The type descibing the event. See BaseEvent.

    Parameters

    event : TEvent[ 'name' ]

    The name of the event.

    callback : GetCallback<TEvent>

    The function to be called on event.

    [ options ] : GetCallbackOptions<TEvent>

    Additional options.

    Returns

    void
  • inherited

    set( values ) → void

    Creates and sets the value of an observable properties of this object. Such a property becomes a part of the state and is observable.

    It accepts a single object literal containing key/value pairs with properties to be set.

    This method throws the observable-set-cannot-override error if the observable instance already has a property with the given property name. This prevents from mistakenly overriding existing properties and methods, but means that foo.set( 'bar', 1 ) may be slightly slower than foo.bar = 1.

    In TypeScript, those properties should be declared in class using declare keyword. In example:

    public declare myProp1: number;
    public declare myProp2: string;
    
    constructor() {
    	this.set( {
    		'myProp1: 2,
    		'myProp2: 'foo'
    	} );
    }
    

    Parameters

    values : object

    An object with name=>value pairs.

    Returns

    void
  • inherited

    set( name, value ) → void

    Creates and sets the value of an observable property of this object. Such a property becomes a part of the state and is observable.

    This method throws the observable-set-cannot-override error if the observable instance already has a property with the given property name. This prevents from mistakenly overriding existing properties and methods, but means that foo.set( 'bar', 1 ) may be slightly slower than foo.bar = 1.

    In TypeScript, those properties should be declared in class using declare keyword. In example:

    public declare myProp: number;
    
    constructor() {
    	this.set( 'myProp', 2 );
    }
    

    Type parameters

    K

    Parameters

    name : K

    The property's name.

    value : Notification[ K ]

    The property's value.

    Returns

    void
  • showInfo( message, data = { [data.namespace], [data.title] } ) → void

    Shows an information notification.

    By default, it fires the show:info event with the given data. The event namespace can be extended using the data.namespace option. For example:

    showInfo( 'Editor is offline.', {
    	namespace: 'editor:status'
    } );
    

    will fire the show:info:editor:status event.

    You can provide the title of the notification:

    showInfo( 'Editor is offline.', {
    	title: 'Network information'
    } );
    

    Parameters

    message : string

    The content of the notification.

    data : object

    Additional data.

    Properties
    [ data.namespace ] : string

    Additional event namespace.

    [ data.title ] : string

    The title of the notification.

    Defaults to {}

    Returns

    void
  • showSuccess( message, data = { [data.namespace], [data.title] } ) → void

    Shows a success notification.

    By default, it fires the show:success event with the given data. The event namespace can be extended using the data.namespace option. For example:

    showSuccess( 'Image is uploaded.', {
    	namespace: 'upload:image'
    } );
    

    will fire the show:success:upload:image event.

    You can provide the title of the notification:

    showSuccess( 'Image is uploaded.', {
    	title: 'Image upload success'
    } );
    

    Parameters

    message : string

    The content of the notification.

    data : object

    Additional data.

    Properties
    [ data.namespace ] : string

    Additional event namespace.

    [ data.title ] : string

    The title of the notification.

    Defaults to {}

    Returns

    void
  • showWarning( message, data = { [data.namespace], [data.title] } ) → void

    Shows a warning notification.

    By default, it fires the show:warning event with the given data. The event namespace can be extended using the data.namespace option. For example:

    showWarning( 'Image upload error.', {
    	namespace: 'upload:image'
    } );
    

    will fire the show:warning:upload:image event.

    You can provide the title of the notification:

    showWarning( 'Image upload error.', {
    	title: 'Upload failed'
    } );
    

    Note that each unhandled and not stopped warning notification will be displayed as a system alert. The plugin responsible for displaying warnings should stop() the event to prevent displaying it as an alert:

    notifications.on( 'show:warning', ( evt, data ) => {
    	// Do something with the data.
    
    	// Stop this event to prevent displaying it as an alert.
    	evt.stop();
    } );
    

    You can attach many listeners to the same event and stop() this event in a listener with a low priority:

    notifications.on( 'show:warning', ( evt, data ) => {
    	// Show the warning in the UI, but do not stop it.
    } );
    
    notifications.on( 'show:warning', ( evt, data ) => {
    	// Log the warning to some error tracker.
    
    	// Stop this event to prevent displaying it as an alert.
    	evt.stop();
    }, { priority: 'low' } );
    

    Parameters

    message : string

    The content of the notification.

    data : object

    Additional data.

    Properties
    [ data.namespace ] : string

    Additional event namespace.

    [ data.title ] : string

    The title of the notification.

    Defaults to {}

    Returns

    void
  • inherited

    stopDelegating( [ event ], [ emitter ] ) → void

    Stops delegating events. It can be used at different levels:

    • To stop delegating all events.
    • To stop delegating a specific event to all emitters.
    • To stop delegating a specific event to a specific emitter.

    Parameters

    [ event ] : string

    The name of the event to stop delegating. If omitted, stops it all delegations.

    [ emitter ] : Emitter

    (requires event) The object to stop delegating a particular event to. If omitted, stops delegation of event to all emitters.

    Returns

    void
  • inherited

    stopListening( [ emitter ], [ event ], [ callback ] ) → void

    Stops listening for events. It can be used at different levels:

    • To stop listening to a specific callback.
    • To stop listening to a specific event.
    • To stop listening to all events fired by a specific object.
    • To stop listening to all events fired by all objects.

    Parameters

    [ emitter ] : Emitter

    The object to stop listening to. If omitted, stops it for all objects.

    [ event ] : string

    (Requires the emitter) The name of the event to stop listening to. If omitted, stops it for all events from emitter.

    [ callback ] : Function

    (Requires the event) The function to be removed from the call list for the given event.

    Returns

    void
  • inherited

    unbind( unbindProperties ) → void

    Removes the binding created with bind.

    // Removes the binding for the 'a' property.
    A.unbind( 'a' );
    
    // Removes bindings for all properties.
    A.unbind();
    

    Parameters

    unbindProperties : Array<'off' | 'on' | 'once' | 'listenTo' | 'stopListening' | 'fire' | 'delegate' | 'stopDelegating' | 'set' | 'bind' | 'unbind' | 'decorate' | 'destroy' | 'context' | 'init' | 'showSuccess' | 'showInfo' | 'showWarning'>

    Observable properties to be unbound. All the bindings will be released if no properties are provided.

    Returns

    void
  • private

    _showNotification( data = { data.message, [data.namespace], [data.title], data.type } ) → void

    Fires the show event with the specified type, namespace and message.

    Parameters

    data : object

    The message data.

    Properties
    data.message : string

    The content of the notification.

    [ data.namespace ] : string

    Additional event namespace.

    [ data.title ] : string

    The title of the notification.

    data.type : NotificationEventType

    The type of the message.

    Returns

    void

Events

  • inherited

    change:{property}( eventInfo, name, value, oldValue )

    Fired when a property changed value.

    observable.set( 'prop', 1 );
    
    observable.on<ObservableChangeEvent<number>>( 'change:prop', ( evt, propertyName, newValue, oldValue ) => {
    	console.log( `${ propertyName } has changed from ${ oldValue } to ${ newValue }` );
    } );
    
    observable.prop = 2; // -> 'prop has changed from 1 to 2'
    

    Parameters

    eventInfo : EventInfo

    An object containing information about the fired event.

    name : string

    The property name.

    value : TValue

    The new property value.

    oldValue : TValue

    The previous property value.

  • inherited

    set:{property}( eventInfo, name, value, oldValue )

    Fired when a property value is going to be set but is not set yet (before the change event is fired).

    You can control the final value of the property by using the event's return property.

    observable.set( 'prop', 1 );
    
    observable.on<ObservableSetEvent<number>>( 'set:prop', ( evt, propertyName, newValue, oldValue ) => {
    	console.log( `Value is going to be changed from ${ oldValue } to ${ newValue }` );
    	console.log( `Current property value is ${ observable[ propertyName ] }` );
    
    	// Let's override the value.
    	evt.return = 3;
    } );
    
    observable.on<ObservableChangeEvent<number>>( 'change:prop', ( evt, propertyName, newValue, oldValue ) => {
    	console.log( `Value has changed from ${ oldValue } to ${ newValue }` );
    } );
    
    observable.prop = 2; // -> 'Value is going to be changed from 1 to 2'
                         // -> 'Current property value is 1'
                         // -> 'Value has changed from 1 to 3'
    

    Note: The event is fired even when the new value is the same as the old value.

    Parameters

    eventInfo : EventInfo

    An object containing information about the fired event.

    name : string

    The property name.

    value : TValue

    The new property value.

    oldValue : TValue

    The previous property value.

  • show( eventInfo, data )

    Fired when one of the showSuccess(), showInfo(), showWarning() methods is called.

    Parameters

    eventInfo : EventInfo

    An object containing information about the fired event.

    data : NotificationShowEventData

    The notification data.

  • show:info( eventInfo, data )

    Fired when the showInfo() method is called.

    Parameters

    eventInfo : EventInfo

    An object containing information about the fired event.

    data : NotificationShowEventData<NotificationType>

    The notification data.

  • show:success( eventInfo, data )

    Fired when the showSuccess() method is called.

    Parameters

    eventInfo : EventInfo

    An object containing information about the fired event.

    data : NotificationShowEventData<NotificationType>

    The notification data.

  • show:warning( eventInfo, data )

    Fired when the showWarning() method is called.

    When this event is not handled or stopped by event.stop(), the data.message of this event will be automatically displayed as a system alert.

    Parameters

    eventInfo : EventInfo

    An object containing information about the fired event.

    data : NotificationShowEventData<NotificationType>

    The notification data.